Nortel 325-24T Configuration Manual page 366

366 Chapter 9 Configuring the switch using Device Manager
Figure 148 Diagnostics dialog box — Topology Table tab
Table 139
Table 139 Topology Table tab fields
Field
Slot
Port
IpAddr
SegId
MacAddr
ChassisType
BkplType
LocalSeg
CurState
320985-A Rev 01
The Topology Table tab opens
describes the Topology Table tab fields.
Description
The slot number in the chassis in which the topology message
was received.
The port on which the topology message was received.
The IP address of the sender of the topology message.
The segment identifier of the segment from which the remote
agent sent the topology message. This value is extracted from the
message.
The MAC address of the sender of the topology message.
The chassis type of the device that sent the topology message.
The backplane type of the device that sent the topology message.
Indicates if the sender of the topology message is on the same
Ethernet segment as the reporting agent.
The current state of the sender of the topology message. The
choices are:
• topChanged —Topology information has recently changed.
• heartbeat —Topology information is unchanged.
• new — The sending agent is in a new state.
(Figure 148).