Nortel 325-24T Configuration Manual page 117

Figure 25 Rate Limiting Configuration screen
Packet Type
---- -------------
Switch [ Both
Stack [ Both
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Menu.
Table 19
Table 19 Rate Limiting Configuration screen fields
Field Description
Unit Allows you to select the unit number (when stacking is configured) to view or
configure. To view or configure another unit, type its unit number and press
Enter
in a standalone configuration.
Stack Displays information relevant to the stack, if the switch is operating in the stack
configuration.
Packet Type Allows you to select the packet types for rate-limiting.
Default value:
Range:
Rate Limiting Configuration
Limit
--------
] [ 0 pps ]
] [ 0 pps ]
describes the fields in the Rate Limiting Configuration screen.
, or press the spacebar to toggle the unit numbers. This field is not present
Chapter 2 Using the console interface
Press Ctrl-C to return to Main
Both
Both, Multicast, Broadcast
System Configuration Guide
117