Nortel 325-24T Configuration Manual page 448

448 Command List
Table 168 CLI command list (continued)
Command
cli-password {switch|stack} {ro|rw} <WORD>
<WORD>
cli-password {switch|stack} {serial|telnet}
{none|local|radius}
clock summer-time <zone> [date {<day> <month>
<year> <hh:mm>} {<day> <month> <year>
<hh:mm>}] [<offset>]
clock time-zone <zone> <hours> <minutes>
cmd-interface {cli|menu}
configure {terminal|network}
configure network [load-on-boot
{disable|use-bootp|use-config}]
configure network [filename <FILENAME>]
configure network [address <XXX.XXX.XXX.XXX>]
configure command
Configuring CANA using the CLI
copy config nvram
copy config tftp [address <XXX.XXX.XXX.XXX>]
filename <WORD>
copy tftp config [address <XXX.XXX.XXX.XXX>]
filename <WORD>
copy running-config tftp {<IP Address> <filename>}
default auto-negotiation-advertisements [port
<portlist>]
default autotopology
default autosave enable
default command
default duplex [port <portlist>]
default eapol guest-vlan
default flowcontrol [port <portlist>]
default http-port
320985-A Rev 01
Page No.
Configuring and Managing Security for Nortel
Ethernet Switches 325 and 425, Software
Release 3.6
(320988-A)
page 295
page 294
page 279
page 132
page 266
page 132
page 331
page 285
page 278
page 278
page 270
page 335
page 298
page 288
page 131
page 326
Configuring and Managing Security for Nortel
Ethernet Switches 325 and 425, Software
Release 3.6
(320988-A)
page 328
Configuring and Managing Security for Nortel
Ethernet Switches 325 and 425, Software
Release 3.6
(320988-A)