Configuring Switch Port Autonegotiation Speed - Nortel 325-24T Configuration Manual

390 Chapter 12 Configuring the switch using Web-based management
Table 145
Table 145 System page items
Item Range
System
Description
System Object ID
System Up Time
System Name 1..255
System Location 1..255
System Contact 1..255
2
3

Configuring switch port autonegotiation speed

You can configure a specific switch port or all switch ports to autonegotiate for the
highest available speed of the connected station or you can set the speed for
selected switch ports (autonegotiation is not supported on 1000 Mb/s fiber optic
ports).
To configure a switch port's autonegotiation speed:
1
320985-A Rev 01
describes the items on the System page.
Description
The factory set description of the hardware and software versions.
The character string that the vendor created to uniquely identify this
device.
The elapsed time since the last network management portion of the
system was last re-initialized.
Note: This field is updated only when the screen is redisplayed.
Type a character string to create a name to identify the switch, for
example Finance Group.
Type a character string to create a name for the switch location, for
example, First Floor.
Type a character string to create the contact information for the network
manager or the selected person to contact regarding switch operation,
for example, mcarlson@company.com
Note: To operate correctly with the Web interface, the system contact
should be an e-mail address.
Type information in the text boxes.
Click Submit.
From the main menu, choose Configuration > Port Management.
The Port Management page opens (Figure 160).