Configuring The Connection - Vnc - HEIDENHAIN TNC 620 User Manual

2
Configuring the connection – VNC
Configuring an external computer
You do not need an additional VNC server for your
external computer for connecting to VNC.
Install and configure the VNC server, e.g. the TightVNC
server, before configuring the control.
Configuring the control
Proceed as follows to configure the control:
Press the DIADUR key to open the HeROS menu
Select Remote Desktop Manager
The control opens the Remote Desktop Manager.
Press New connection
Press VNC
The control opens the Edit the connection pop-up window.
Edit the connection
Setting
Connection name:
Restarting after end of
connection:
Automatic starting upon
login
Add to favorites
Move to the following
workspace
Release USB mass memory
Calculator
Password
118
Meaning
Name of the connection in the Remote Desktop Manager
Behavior with terminated connection:
Always restart
Never restart
Always after an error
Ask after an error
Connection automatically established during control power-up
Connection icon in the task bar:
Single click with the left mouse button
The control switches to the desktop of the connection.
Single click with the right mouse button
The control displays the connection menu.
Number of desktop for the connection, whereby desktops 0 and 1
are reserved for the NC software
Default setting: Third desktop
Permit access to connected USB mass memory
Host name or IP address of the external computer. In the recom-
mended configuration of the IPC 6641, the IP address 192.168.254.3
is used
Password for connecting to the VNC server
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Introduction | Remote Desktop Manager (option 133)
Input
Required
Required
Required
Required
Required
Required
Required
Required