HEIDENHAIN TNC 620 User Manual page 393

Programming Q Parameters | Additional functions
Group Gruppen-
name nummerID
Branch addresses of the system
13
Machine status
20
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Systemdaten- Index
nummer
1 -
2 -
3 -
1 -
2 -
3 -
4 -
5 -
7 -
8 -
9 -
10 -
11 -
14 -
20 -
21 -
22 -
Description
Label jumped to during M2/M30 instead of
ending the current program.
Value = 0: M2/M30 have the normal effect
Label jumped to in the event of FN14:
ERROR with the NC CANCEL reaction
instead of aborting the program with an error
message. The error number programmed in
the FN14 command can be read under ID992
NR14.
Value = 0: FN14 has the normal effect.
Label jumped to in the event of an inter-
nal server error (SQL, PLC, CFG) or with
erroneous file operations (FUNCTION
FILECOPY, FUNCTION FILEMOVE, or
FUNCTION FILEDELETE) instead of aborting
the program with an error message.
Value = 0: Error has the normal effect.
Active tool number
Prepared tool number
Active tool axis
0 = X 6 = U
1 = Y 7 = V
2 = Z 8 = W
Programmed spindle speed
Active spindle condition
-1 = spindle condition not defined
0 = M3 active
1 = M4 active
2 = M5 active after M3
3 = M5 active after M4
Active gear range
Active coolant status
0 = off, 1 = on
Active feed rate
Index of prepared tool
Index of active tool
Number of active spindle
Programmed cutting speed in turning opera-
tion
Spindle mode in turning mode:
0 = constant speed
1 = constant cutting speed
Coolant status M7:
0 = inactive, 1 = active
10
393