HEIDENHAIN TNC 620 User Manual page 354

9
Calling a program with PGM CALL
The PGM CALL function calls any program as a subprogram. The
control runs the called program from the position where it was
called in the program.
To select the functions for program call, press
the PGM CALL key
Press the CALL PROGRAM soft key
The control starts the dialog for defining the
program to be called.
Enter the path name with the keyboard
or
Press the SELECT FILE soft key
The control shows a selection window that
allows you to select the program to be called.
Press the ENT key
354
Subprograms and Program Section Repeats | Any desired NC program as subprogram
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017