HEIDENHAIN TNC 620 User Manual page 73

First Steps with the TNC 620 | Programming the first part
Retracting tool: Press the orange axis key Z and
enter the value for the position to be approached,
e.g. 250. Press the ENT key
Confirm Tool radius comp: RL/RR/no comp?
with the ENT key: Do not activate radius
compensation
Confirm Feed F=? with the ENT key: Rapid
traverse (FMAX)
Miscellaneous function M? Enter M2 to end the
program, then confirm with the END key
The control stores the entered positioning block.
Further information on this topic
Complete example with NC blocks
Further information:
chamfers with Cartesian coordinates", page 297
Creating a new program
Further information:
page 154
Approaching/departing contours
Further information:
page 278
Programming contours
Further information:
Programmable feed rates
Further information:
Tool radius compensation
Further information:
Miscellaneous functions M
Further information:
inspection, spindle and coolant ", page 470
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
"Example: Linear movements and
"Creating and writing programs",
"Approaching and departing a contour",
"Overview of path functions", page 288
"Possible feed rate input", page 160
"Tool radius compensation ", page 257
"Miscellaneous functions for program run
1
73