Counter Settings - HEIDENHAIN TNC 620 User Manual

MOD Functions | Counter settings

19.3 Counter settings

With the MOD function Counter settings, you can change the
current count (actual value) and the target value (nominal value).
Proceed as follows to select the Counter settings:
In the MOD menu, select the Counter settings group
Select the current count
Select the target value for the counter
Press the APPLY soft key
Press the OK soft key
The control immediately takes over the selected value in the status
display
You can change the Counter settings via soft key as follows:
Soft key Meaning
Reset count
Increase count
Lower count
You can also enter the values directly with a connected mouse.
Further information: "Defining a counter", page 512
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
19
741