Backup And Restore - HEIDENHAIN TNC 620 User Manual

2

Backup and restore

With the NC/PLC Backup and NC/PLC Restore functions you can
back up and restore individual folders or the complete TNC drive.
You can save the backup files locally, on a network drive, or to USB
storage devices.
The backup program generates a *. tncbck file that can also be
processed by the PC tool TNCbackup (part of TNCremo). The
restore program can restore these files as well as those from
existing TNCbackup programs. If a *. tncbck file is selected in
the file manager of the control, the program NC/PLC Restore is
automatically launched.
Backup and restore is subdivided into several steps. Navigate
between these steps with the FORWARD and BACK soft keys.
Specific actions for steps are selectively displayed as soft keys.
Opening NC/PLC Backup or NC/PLC Restore
Proceed as follows to open the functions:
Open the task bar at the bottom edge of the screen
Further information:
Press the green HEIDENHAIN button to open the JH menu
Select the Tools menu item
Open the NC/PLC Backup or NC/PLC Restore menu item
The control opens the pop-up window.
112
"Window manager", page 100
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Introduction | Window manager