HEIDENHAIN TNC 620 User Manual page 196

4
The control in a network
Protect your data and your control by running your
machines in a secure network.
Use the Ethernet card to connect the control to the
network.
Further information:
The control logs any error messages that occur during
network operation.
If the control is connected to a network, the left directory window
displays additional drives. All the functions described above
(selecting a drive, copying files, etc.) also apply to network drives,
provided that you have been granted the corresponding rights.
Connecting and disconnecting a network drive
To call the file manager, press the PGM MGT key
Select network settings: Press the NET soft key
(soft-key row 2)
To manage the network drives: Press the
DEFINE NETWORK CONNECTN. soft key.
In a window the control shows the network
drives available for access.
With the soft keys described below you can
define the connection for each drive.
Soft key Function
Connect
Establish the network connection. If the
connection is active, the control marks the
Mount column.
Separate
End network connection
Auto
Automatically establish network connection
whenever the control is switched on. The
control marks the Auto column if the connec-
tion is established automatically
Add
Set up new network connection
Remove
Delete existing network connection
Copy
Copy network connection
Edit
Edit network connection
Clear
Delete the status window
196
Fundamentals, File Management | Working with the file manager
"Ethernet interface ", page 757
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017