HEIDENHAIN TNC 620 User Manual page 28

New functions 81760x-05
The new Batch Process Manager function enables you to
plan production orders,
Manager", page 611
New FUNCTION PROG PATH function for taking the entire
tool radius into account in 3-D radius compensation, see
"Interpretation of the programmed path", page 588
When an application is active on the third or fourth desktop, the
operating mode keys are also effective with touch operation,
see "Save elements and switch to the NC program", page 135
The TCPM function (option 9) was expanded by the selection
of the tool reference point and the center of rotation, see
"Selection of tool reference point and center of rotation",
page 577
New tool-oriented pallet machining function, see "Tool-oriented
machining", page 606
New pallet preset management, see "Pallet preset
management", page 605
If a pallet table is selected in a Program Run operating mode,
the Tooling list and T usage order are calculated for the
entire pallet table, see "Tool management (option number 93)",
page 260
New FUNCTION COUNT function for controlling a counter, see
"Defining a counter", page 512
New FUNCTION LIFTOFF function for retracting the tool from
the contour upon an NC stop, see "Lift off tool at NC stop:
FUNCTION LIFTOFF", page 529
You can also open the tool-carrier files in the file management,
see "Tool carrier management", page 493
With the ADAPT NC PGM / TABLE function, you can also import
and modify freely definable tables, see "Importing tool tables",
page 243
The machine tool builder can define update rules that make it
possible, for example, to automatically remove umlauts from
tables and NC programs when importing a table, see "Importing
tool tables", page 243
A quick search for the tool name is possible in the tool table,
see "Entering tool data into the table", page 234
It is possible to comment out NC blocks, see "Commenting out
an existing NC block", page 201
The machine tool builder can disable the setting of presets in
individual axes, see "Saving presets in the table", page 644,
see "Presetting with a 3-D touch probe (option number 17)",
page 676
Line 0 of the preset table can also be edited manually, see
"Saving presets in the table", page 644
The CAD viewer exports points with FMAX to an H file, see
"Selecting the file type", page 338
When multiple instances of the CAD viewer are open, they are
shown somewhat smaller on the third desktop.
The CAD viewer now enables you to extract data from STEP ,
IGES and STEP files, see "Data Transfer from CAD Files",
page 323
28
Further information: "Batch Process
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Fundamentals | Control model, software and features