Show Basic Rotation And Offset; Rescind Basic Rotation Or Offset - HEIDENHAIN TNC 620 User Manual

16
Manual Operation and Setup | Compensating workpiece misalignment with 3-D touch probe (option 17)
Save table rotation in the preset table
You can save the misalignment of the rotary table in any row of the
preset table. The control stores the angle in the offset column of
the rotary table, e.g. in the C_OFFS column for a C axis.
Press the TABLE ROT. IN PRESET TABLE soft key after the
probing procedure
If appropriate, the control opens the Overwrite active preset?
menu.
Press the OVERWRITE PRESET soft key
The control saves the offset in the preset table.
You may have to change the view in the preset table with the
BASE TRANSFORM./OFFSET soft key for this column to be
displayed.

Show basic rotation and offset

If you select the PROBING ROT function, the control displays the
active angle of the basic rotation in the Angle of basic rotation
input field and the active offset in the Offset of rotary table input
field.
In addition, the rotary angle and the offset are shown in the split
screen PROGRAM + STATUS screen layout on the STATUS POS. tab.
When the control moves the machine axis in accordance with the
basic rotation, a symbol for the basic rotation is shown in the status
display.

Rescind basic rotation or offset

Select the probe function by pressing the PROBING ROT soft
key
Enter Angle of basic rotation: 0
Or enter Offset of rotary table: 0
Apply with the SET BASIC ROTATION soft key
Or apply with the SET TABLE ROTATION soft key
To terminate the probe function, press the END soft key
672
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017