16
Manually saving the presets in the preset table
Proceed as follows in order to save presets in the preset table:
Select the Manual operation mode
Move the tool slowly until it touches (scratches)
the workpiece surface, or position the measuring
dial correspondingly
Press the PRESET MANAGEMENT soft key
The control opens the preset table and sets the
cursor to the row of the active preset.
Press the CHANGE PRESET soft key
The control displays all available input options in
the soft-key row.
Select the row in the preset table that you
want to change (the row number is the preset
number)
If needed, select the column in the preset table
that you want to change
Use the soft keys to select one of the available
entry possibilities
646
Manual Operation and Setup | Managing presets
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017