Programs With .Hu And .Hc Extensions Can Be Selected And - HEIDENHAIN TNC 620 User Manual

Fundamentals | Control model, software and features
New functions 81760x-02

Programs with .HU and .HC extensions can be selected and

processed in all operating modes
The functions SELECT PROGRAM and
CALL SELECTED PROGRAM have been introduced, see "Calling
any program as a subprogram", page 353
New FEED DWELL function for programming repeating dwell
times, see "Dwell time FUNCTION FEED", page 526
The FN18 functions have been expanded, see "FN 18: SYSREAD
– Reading system data", page 392
USB data carriers can be locked with the SELinux security
software, see "SELinux security software", page 109
The machine parameter posAfterContPocket (no. 201007) that
influences positioning after an SL cycle has been introduced,
see "Machine-specific user parameters", page 776
Protective zones can be defined in the MOD menu, see
"Entering traverse limits", page 744
Write protection is possible for individual lines in the preset
management, see "Saving presets in the table", page 644
New manual probing function for aligning a plane, see
"Measuring 3-D basic rotation", page 673
New function for aligning the machining plane without rotary
axes, see "Tilting the working plane without rotary axes",
page 562
CAD files can be opened without option number 42, see "Data
Transfer from CAD Files", page 323
New software option 93 Extended Tool Management, see
"Calling tool management", page 261
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
17