Deactivating Function Paraxmode - HEIDENHAIN TNC 620 User Manual

12

Deactivating FUNCTION PARAXMODE

After the control has been started up, the standard
configuration is effective by default.
The control automatically resets the PARAXMODE OFF
parallel-axis function via the following functions:
Selection of program
End of program
M2 and M30
PARAXMODE OFF
You must deactivate the parallel-axis functions before
switching the machine kinematics.
Example
13 FUNCTION PARAXMODE OFF
Use the PARAXCOMP OFF function to switch off the parallel-axis
function. The control then uses the principal axes defined by the
machine manufacturer. Proceed as follows for the definition:
Show the soft-key row with special functions
Press the PROGRAM FUNCTIONS soft key
Select FUNCTION PARAX
Select FUNCTION PARAXMODE
Select FUNCTION PARAXMODE OFF
506
Special Functions | Working with the parallel axes U, V and W
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017