Defining The Plane Function; Position Display - HEIDENHAIN TNC 620 User Manual

13

Defining the PLANE function

Show the soft-key row with special functions
Press the TILT MACHINING PLANE soft key
The control display the available PLANE functions
in the soft-key row.
Select the PLANE function
Selecting functions
Press the soft key linked to the desired function
The control continues the dialog and prompts you for the
required parameters.
Selecting the function while animation is active
Press the soft key linked to the desired function
The control plays the animation.
To apply the currently active function, press the soft key of that
function again or press the ENT key

Position display

As soon as a PLANE function (except PLANE AXIAL) is active, the
control shows the calculated spatial angle in the additional status
display.
In the Distance-To-Go display (ACTDST and REFDST) the control
shows, during tilting (MOVE or TURN mode) in the rotary axis, the
distance to go to the calculated final position of the rotary axis.
538
Multiple-Axis Machining | The PLANE function: Tilting the working plane (option 8)
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017