HEIDENHAIN TNC 620 User Manual page 27

Fundamentals | Control model, software and features
New and modified cycle functions 81760x-04
With Cycle 251 Rectangular pocket, M110 is now taken into
account with circles compensated inwards if it is active during
machining
In the protocol of the KinematicsOpt cycles 451 and 452 the
position of the measured rotary axes can be output before and
after optimization. (Software option 52)
Cycle 225 has been expanded with parameters Q516, Q367 and
Q574. This enables a preset for the specific text position to be
defined or the text length and character height to be scaled
In Cycles 481 to 483, parameter Q340 was expanded with the
input option "2". This makes it possible to check the tool without
changing the tool table
Cycle 251 has been expanded by parameter Q439. The finishing
strategy was also revised
The finishing strategy was revised with cycle 252
Cycle 275 has been expanded with parameters Q369 and Q439
Further information: Cycle Programming User's Manual
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
27