Switching Between Table And Form View - HEIDENHAIN TNC 620 User Manual

12
In a table that already contains lines you can not
change the table properties Name and Column type.
Once you have deleted all lines, you can change these
properties. If required, create a backup copy of the table
beforehand.
With the CE and ENT key combination, you can reset
invalid values in fields with the TSTAMP column type.
Exiting the structure editor
Press the OK soft key
The control closes the editor form and applies the changes. All
changes are discarded by pressing the CANCEL soft key.

Switching between table and form view

All tables with the .TAB extension can be opened in either list view
or form view.
Press the key for setting the screen layout.
Select the respective soft key for list view or
form view (form view: with or without dialog
texts)
In the left half of the form view, the control lists the line numbers
with the contents of the first column.
In the right half you can change the data.
Press the ENT key or the arrow key to move to the next entry
field
To select another line press the navigation key (folder symbol).
This moves the cursor to the left window, and you can select
the desired line with the arrow keys. Press the green navigation
key to switch back to the input window.
520
Special Functions | Freely definable tables
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017