HEIDENHAIN TNC 620 User Manual page 417

Programming Q Parameters | Additional functions
Group Gruppen-
name nummerID
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Systemdaten- Index
nummer
20 -
30 -
31 -
32 0
Cycle number
40 -
101 -
136 -
Description
Information on combined milling/turning
mode of operation:
0 = Milling (after FUNCTION MODE MILL)
1 = Turning (after FUNCTION MODE TURN)
10 = Execute the operations for the turning-
to-milling transition
11 = Execute the operations for the milling-to-
turning transition
Interpolation of multiple axes permitted?
0 = No (e.g. for straight cut control)
1 = yes
R+/R– possible/permitted in MDI mode?
0 = No
1 = Yes
Cycle call possible/permitted?
0 = No
1 = Yes
Single cycle enabled:
0 = No
1 = Yes
Copy tables in Test Run operating mode?
Value 1 will be set when a program is select-
ed and when the RESET+START soft key is
pressed. The iniprog.h system cycle will
then copy the tables and reset the system
datum.
0 = no
1 = yes
M101 active (visible condition)?
0 = no
1 = yes
M136 active?
0 = no
1 = yes
10
417