HEIDENHAIN TNC 620 User Manual page 186

4
Displaying and editing Excel files
Proceed as follows to open and edit Excel files with the extension
xls, xlsx or csv directly on the control:
To call the file manager, press the PGM MGT key.
Select the directory in which the Excel file is
saved
Move the cursor to the Excel file
Press the ENT key
The control opens the Excel file in its own
application using the
With the key combination ALT+TAB you can always
return to the control's user interface while leaving the
Excel file open. Alternatively, you can also click the
corresponding symbol in the task bar to switch back to
the user interface of the control.
If you position the mouse pointer over a button, a
brief tool tip explaining the function of this button will
be displayed. More information on how to use the
Gnumeric
Proceed as follows to exit Gnumeric:
Use the mouse to select the File menu item
Select Close
The control returns to the file management.
If you are not using a mouse, proceed as follows to close the
additional Gnumeric
Press the key for switching the soft keys
The
down menu.
Move the cursor to the Close menu item
Press the ENT key
The control returns to the file management.
186
Fundamentals, File Management | Working with the file manager
Gnumeric
function is provided under Help.
tool:
additional tool opens the File pull-
Gnumeric
additional tool.
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017