16.2 Moving The Machine Axes; Note; Moving The Axis With The Axis Direction Keys - HEIDENHAIN TNC 620 User Manual

Manual Operation and Setup | Moving the machine axes

16.2 Moving the machine axes

Note

Refer to your machine manual.
Movement of the axes via the axis direction keys can
vary depending on the machine.

Moving the axis with the axis direction keys

Operating mode: Press the Manual operation
key
Press the axis direction key and hold it down as
long as you wish the axis to move; or
To move the axis continuously: Press and hold
the axis direction button and press the NC Start
key
To stop: Press the NC Stop key
You can move several axes at a time with these two methods. The
control then shows the feed rate. You can change the feed rate at
which the axes are moved with the F soft key.
Further information: "Spindle speed S, feed rate F and
miscellaneous function M", page 637
If a moving task is active on the machine, the control displays the
control in operation symbol.
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
16
625