Figure 20: Lcc-Cb Leds; Table 13: Lcc-Cb Leds - Juniper T4000 Hardware Manual

T4000 Router Hardware Guide
Related
Documentation
38

Figure 20: LCC-CB LEDs

LCC-CB LEDs on page 38
LCC-CB Port LEDs on page 38
LCC-CB LEDs
The LEDs located in the middle of the LCC-CB indicate its
describes the functions of the LCC-CB LEDs.

Table 13: LCC-CB LEDs

Label Color
MASTER Blue
–
Yellow
FAIL
–
OK Green
–
LCC-CB Port LEDs
The six RJ-45 ports labeled
each port labeled or
LINK ACT
T4000 Host Subsystem Description on page 35
T4000 Control Board Description on page 36
T4000 Craft Interface LEDs on page 25
Link
Activity
LED
LED
State Description
On steadily LCC-CB is functioning as the master.
Off LCC-CB is functioning as the backup.
On steadily LCC-CB has failed.
Off No faults have been detected on the LCC-CB.
On steadily LCC-CB is online and is functioning normally.
Blinking LCC-CB is powering up, but not online.
Off LCC-CB is offline.
through , the port labeled
SFC0 SFC4
are not currently supported.
status.Table 13 on page 38
, and the LEDs for
JCS
Copyright © 2013, Juniper Networks, Inc.