Table of Contents
Advertisement
深圳市盛腾仪器仪表有限公司
1. Connect the equipment as shown in Figure 2-6. Use a known good cable
such as the one that was supplied with your analyzer.
Figure 2-6. Equipment Setup for Transmission Measurement
Press cm] [ml . 1 titer
3 .
Press [POWER) @ [ENTER).
4. Verify that the data trace falls within f0.5 dB of 0 dB. See Figure 2-7 for a
typical result.
Tel:0755-83589391
Performing the Operator's Check
N E T W O R K A N A L Y Z E R
R F O U T
Fax:0755-83539691
Getting Started
RF
2-15
Website: www.Sengt.c
- Quick Links:
- Performing the Operator's Check
Hide quick links:
Advertisement
Table of Contents
