To Recall From A Disk Or Internal Memory - HP 8711C User Manual

Using Instrument Functions
Saving and Recalling Measurement Results
The network analyzer allows you to recall and display measurement
results that you saved as STATE hles. You can then compare the recalled
measurements to subsequent measurements. The analyzer can display
both a data and memory trace for each measurement channel. The data
trace is saved when you select Data iITs in the I&fine Save menu. The
memory trace is saved as part of the instrument state. These traces will be
automatically redisplayed when you recall the Ele from a disk or internal
memory.
Calibration sets are linked to the instrument state and measurement
parameter for which the calibration was done. Therefore a saved calibration
can be used for multiple instrument states as long as the measurement
parameter, frequency range, and number of points are the same.
Press
2. If necessary, change directories to the directory that contains the desired
4. Press %~al'L SW&X to recall the desired file to the network analyzer.
N O T E
Refer to "Measurement Setup and Control with Fast Recall" in Chapter 7 for information on using the
analyzer's fast recall feature to quickly recall often-used instrument states.
4-68
深圳市盛腾仪器仪表有限公司
[ )
SAVE RECALL
the location where your desired file exists.
bar to the Ille you want to recall.
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c