HP 8711C User Manual page 396

Position
深圳市盛腾仪器仪表有限公司
external monitors. Also affects network analyzer's internal CRT. Default
setting is 31.68 psec. This setting is not affected by an instrument preset.
See "Using an External VGA Monitor" in Chapter 4 for more information.
the display on both the internal CRT and an external monitor. Accepts whole
number values from 1 to 100, with 1 representing as far left as possible and
with 100 representing as far right as possible. The default value set at the
factory (and obtained by pressing Restore D&f&tits ) is 73. This setting is
not affected by an instrument preset.
See "Using an External VGA Monitor" in Chapter 4 for more information on
using an external display.
Access Keys:
See "Saving and Recalling Measurement Results" in Chapter 4 for more
information.
Access Keys:
RECALL
saved file to be compatible with older model ("A" or "B") analyzers.
See "Saving and Recalling Measurement Results" in Chapter 4 for more
information.
Access Keys:
Tel:0755-83589391
)
OPTIONS
)
OPTIONS
]
Define Save File Format;
Fax:0755-83539691
Reference
H
9 - 3 3
Website: www.Sengt.c