Prompting The Operator - HP 8711C User Manual

Automating Measurements
Operator Interaction
You can display a message in the center of the analyzer's display by using the
following SCPI command:
For example:
OUTPUT BRfna;"DISP:ANN:MESS 'Connect device, then press button"'
You can specify how long you want the message to remain on the screen by
example :
lb clear the message immediately, use the command:
The message string ca.n contain a maximum of 25 lines with up to
47 characters per line. However, it cannot be more than 254 characters in
length, including carriage returns and line feeds.
small one-line message near the bottom of the screen. For example:
7-20
深圳市盛腾仪器仪表有限公司
DISPlay:ANNotation:MESSage <STRING>
OUTPUT ORfna;"DISP:ANN:MESS 'Test passed."',MEDIUM
DISPlay:ANNotation:MESSage:CLEar
DISP "Connect device to REFLECTION port"
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.co