Using A Keyboard; To Connect The Keyboard - HP 8711C User Manual

深圳市盛腾仪器仪表有限公司
You can use an IBM PC-AT compatible keyboard with your analyzer. A
keyboard is useful when entering and editing names for files and directories.
It is also useful for creating and editing IBASIC programs (Option lC2).
All of the analyzer front panel hardkey and softkey functions can be activated
from a keyboard also. See "Front Panel Control Using a Keyboard," later in
this section.
To connect a keyboard, hrst turn off the analyzer. Then connect a PC-AT
compatible keyboard with a mini-DIN connector to the rear panel DIN
KEYBOARD connector. See Figure l-4 in Chapter 1 for the location of the
keyboard connector. Turn the analyzer back on after the keyboard connector
is fully inserted into the connector.
N O T E
If your keyboard has a standard (large 5-pin) DIN connector, you will need to use a DIN to mini-DIN
no. 1252-4141. Contact the nearest HP sales or service office for more information.
Tel:0755-83589391 Fax:0755-83539691
4-93
Website: www.Sengt.c