HP 8711C User Manual page 424

State
L e v e l
R e f e r e n c e Softkey in [EEEj menu. Sets the position of the reference line from the
Tracking
深圳市盛腾仪器仪表有限公司
analyzer a program from internal memory, internal disk, or external disk.
See HP Instrument BASIC User's Handbook
the
Access Keys:
[
SAVE RECALL
in [ )
SAVE RECALL
from internal memory, internal disk, or external disk.
See "Saving and Recalling Measurement Results" in Chapter 4 for more
information.
value is noted on the screen as "Ref".
top of the graticule (10) to the bottom (0) or in between. Default position is
See Figure 2-3 in Chapter 2.
the peak point of the measurement trace by scaling the trace such that the
point of interest always falls on the display reference line.
See "Using Reference Tracking" in Chapter 4 for more information.
menus. Selects forward reflection type of measurement. Power is output from
the RF OUT port and also measured there.
See "Measuring Reflection Response" in Chapter 3 for more information.
Access Keys: @iEEj or @EXE] m [BEGIN)
Tel:0755-83589391
] Prctgrm~
menu. Recalls instrument state hles (not plot files)
Fax:0755-83539691
Reference
for more information.
Website: www.Sengt.c
9-61