Define The Printer Or Plotter Settings - HP 8711C User Manual

Using Instrument Functions
Connecting and Configuring Printers and Plotters
You will only have to do this setup once if you make all your hardcopies with
the same printing or plotting device.
Press (HARDCOPY) and then Define PCLS , Def in& Prizlter , or
that only one of these choices is selectable at a time.
Three procedures follow. Use "Defining a PCL5 Printer" or "Denrung a
Printer" if you are using a printer. Otherwise, go to "Defining a Plotter."
Defining a PC15 Printer
Make the following selections in the analyzer menus:
1. Press Restorra Defaults to restore the default parameters for a printer.
2. Select the type of printer you have: either Mono&x~m~ or C&or .
3. Select the orientation of the paper to the information printed, either
4. If you do
4-82
深圳市盛腾仪器仪表有限公司
The defaults are:
Parameter
Monochrome/Color
Orientation
Auto Feed
Top Margin
Print Width
vertically, the landscape orientates the printout horizontally.
not
want auto feed active, press Auto Pesd Off .
Tel:0755-83589391
Default
Monochrome
Portrait
ON
0.00 mm
0.00 mm
150 mm 15.91 in1
Fax:0755-83539691 Website: www.Sengt.co