The Voltage Selector Switch - HP 8711C User Manual

Front/Rear Panel
Use a screwdriver to set the line voltage selector switch to the proper position
(either 110 V or 220 V).
The power source must meet the following requirements:
If the ac line voltage does not fall within these ranges, an autotransformer
that provides third wire continuity to ground may be used.
8-24
深圳市盛腾仪器仪表有限公司
Figure 8-13. Voltage Selector Switch location
AC Line Power
Setting
90 to 132 Vat 147 to 66 Hz1
115 v
230 V 196 to 254 Vat 147 to 66 Hzt
Tel:0755-83589391
S W I T C H
Fax:0755-83539691 Website: www.Sengt.co