Line Module; Power Cables - HP 8711C User Manual

WARNING
深圳市盛腾仪器仪表有限公司
The line module contains:
the power cable receptacle
l
the line fuse (and an extra fuse)
l
the voltage selector switch.
l
The line power cable is supplied in one of several configurations, depending
on the destination of the original shipment.
Each instrument is equipped with a three-wire power cable. When connected
to an appropriate ac power receptacle, this cable grounds the instrument
chassis. The type of power cable shipped with each instrument depends on
the country of destination. See Figure 8-11, "Power Cable and Line (Mains)
Plug Part Numbers", for the part numbers of these power cables. Cables
are available in different lengths. Check with your nearest Hewlett-Packard
service center for descriptions and part numbers of cables other than those
described in Figure B- 11.
This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be
inserted in a socket outlet provided with a protective earth
interruption of protective conductor, inside or outside the instrument,
the
is likely to make the instrument dangerous. Intentional interruption is
prohibited.
Tel:0755-83589391 Fax:0755-83539691
Any
contact.
8-21
Website: www.Sengt.c