Other File Utilities - HP 8711C User Manual

To Rename a File
深圳市盛腾仪器仪表有限公司
1. Press
the disk where the desired file is located.
2. Use the front panel knob to move the highlighted bar to the file you want
to rename.
3. Press Prior Menu File Utilitiss Rangma File.
current filename from the analyzer screen.
5. Enter the new filename in one of the following ways:
Use an external keyboard connected to the analyzer's rear panel DIN
l
KEYBOARD connector and type in the new hlename. (For information
on using a keyboard, see "Using a Keyboard" later in this chapter.)
Use the front panel knob and SeTacZ C&zlract@r key to point and
l
select each character of the new filename. Then press Enter .
Tel:0755-83589391
Using Instrument Functions
Saving and Recalling Measurement Results
Fax:0755-83539691
4 - 6 9
Website: www.Sengt.co