Equipment List - HP 8711C User Manual

Getting Started
Performing the Operator's Check
To perform the operator's check you will need the following:
A known good cable such as the one that was supplied with your analyzer.
l
The cable you use should have SO.5 dB of insertion loss up to 1.3 GHz
and SO.75 dB of insertion loss from 1.3 to 3.0 GHz.
A known good load (> 40 dB return loss) that matches the test
l
port impedance of your analyzer such as one from calibration kit
HP 85032B/E (50 a2) or HP 85036BiEI (75 0).
2-14
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c