HP 8711C User Manual page 351

Front/Rear Panel
Connectors
DIN KEYBOARD
This rear panel connector can be used with an optional keyboard or bar code
reader. See "Using a Keyboard" in Chapter 4 for more information. Signals
are IBM PC/AT compatible.
EXT DET Y-INPUT
These rear panel connectors power external detectors and accept input from
them for processing and display. Compatible detectors are:
l
l
PROBE POWER (FUSED)
This front panel connector provides fused power for active probes and other
devices. Figure 8-7 shows the pin-out of the connector looking into the
connector.
The probe power output specihcations are:
Applying loads that result in current levels beyond these specifications can
result in improper instrument operation, or damage to the analyzer.
Both outputs are fused with 0.75 Amp fuses, which are located on a circuit
board on the inside front panel of the analyzer. The fuses are plastic bi-pin
type. The replacement HP part number for these fuses is 2110-0424.
8-12
深圳市盛腾仪器仪表有限公司
HP 86201B
HP 86200B
( n o m i n a l )
Figure g-7. Probe Power Connector
+ 15 V supply: Lut = 200 mA max
-12.6 supply: Lut = 150mA max
Tel:0755-83589391
G R O U N D
v
Fax:0755-83539691
- 1 2 . 6 V
( n o m i n a l )
Website: www.Sengt.c