HP 8711C User Manual page 421

P
state. See Chapter 12 for a complete list of preset state default parameters.
you receive an "Unrecoverable error. ' If this should happen, cycle the power
on the analyzer, and press the I-) key several times while the analyzer
is booting up. (The (j-1 key must be pressed at least twice after you hear
the double beep). Then, follow the on-screen instructions.
information.
Access Keys:
device at HP-IB port, for HP-B printers and plotters only. The default address
is 5. The "recognized HP-B address" is the address that the network analyzer
uses to communicate with the device. The actual address of the device must
be set independently to match.
See "Connecting and ConEguring Printers and Plotters" in Chapter 4 for more
information.
Access Keys:
inch. Check printer manual for appropriate setting. Default is 96 dots per
See "Connecting and Configuring Printers and Plotters" in Chapter 4 for more
information on printer resolution.
9 - 5 8
深圳市盛腾仪器仪表有限公司
Reference
(
HARD
Select ibpy Pm%
(
HARD
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c