Using Graphics To Create On-Screen Diagrams - HP 8711C User Manual

深圳市盛腾仪器仪表有限公司
Diagrams showing how to connect devices or perform measurements can be
a powerful tool. You can draw diagrams on the analyzer's display using the
following SCPI commands:
These commands let you draw lines, rectangles, circles, and text onto the
screen. The number speciEed in the WIND
where the graphics are to be drawn:
draws the graphics to the measurement channel 1 window
draws the graphics to the measurement channel 2 window
draws the graphics to the IBASIC display window
Using split display, you can display the measurement in one half of the screen
while displaying a connection diagram in the other half.
For more details on SCPI graphics commands, refer to "Using Graphics" in the
Programmer's Guide.
If you are using IBASIC, you can use the BASIC graphics keywords such as
MOVE and DRAW to draw diagrams in the IBASIC window.
MOVE
DRAW X2,Y2
Since IBASIC's keywords always draw to the IBASIC window, you cannot
use them to draw in the same window as your measurement. lb draw in
the measurement window, your IBASIC program must use the standard SCPI
commands.
and
For more details on IBASIC graphics, refer to "Graphics and Display
Techniques" in the manual supplement Using
the HP 8711 C/lZC/13C/14C,
Handbook.
Tel:0755-83589391
part of the command selects
OW
HP Instrument BASIC with
in
provided the
Fax:0755-83539691
Automating Measurements
Operator Interaction
7-21
Website: www.Sengt.c