HP 8711C User Manual page 71

深圳市盛腾仪器仪表有限公司
The User 3EGIN softkey gives you the capability to redefine the [BEGIN] key
menu and install user-dellned macro functions. The User BEGIN key is only
available if your analyzer has IBASIC (Option lC2) installed. Use this key to
define macros such as:
l
l
l
Macros must be defined within an IBASIC program. If no User BEGIN
program is currently installed (either by AUTOST or
analyzer will automatically create a default program.
User BEGIN c1n OFF selects the Ijj) key menu to "user" mode when
ON, and to normal operation when OFF.
Once you have changed the User BEGIN mode to ON, the same menu will
be displayed for subsequent key presses of the (BEGINI] hardkey. (This is not
true if your IBASIC program has changed. If the program has changed, the
User BEGIN mode is reset to OFF.)
Use of the User EEGIN function does not restrict access to any normally
available instrument feature such as marker functions, etc., nor does this key
affect sweep update rates.
Refer to example programs provided on the IBASIC programs disk for
implementation requirements. Keystroke recording may be used to modify or
update User BEGIN programs.
See Chapter 7, "Automating Measurements, " for more information.
Tel:0755-83589391
Using the BEGIN Key to Make Measurements
save/recall
Fax:0755-83539691
Making Measurements
Recall
Program) the
3-17
Website: www.Sengt.c