HP 8711C User Manual page 268

Network Analyzers
With IBASIC Controlled
by Computer(s)
深圳市盛腾仪器仪表有限公司
In this configuration, the measurement is controlled by an IBASIC program
running inside the analyzer. IBASIC can provide high-speed measurement
control and data collection, and save the results in program memory or on
disk. The external computer then communicates with IBASIC, and collects
the measurement results at some delined interval. This configuration can
result in higher throughput, especially if the measurement setup and control
is complex. Configure your system as an analyzer with IBASIC (Option lC2)
and an external computer if you would like to:
Centralize automation and application programs
l
Develop a more sophisticated system
l
Add networking
l
Add local automation capability
l
Figure 7-4. Network Analyzer Running IBASIC, Controlled by a Computer
Tel:0755-83589391
Automating Measurements
Configuring Your Test System
Fax:0755-83539691
7-11
Website: www.Sengt.c