HP 8711C User Manual page 324

Automating Measurements
Displaying Measurement Results
NOTE
When using custom X-axis annotation, the SCPI command CALC:MARK:X and query CALC:MAAK:X? \n
return the analyzer's stimulus value, not your custom annotation values. If this is a problem, you can
use the SCPI command CALC:MAAK:POIN to specify the X-axis point number at which you wish to
position the marker.
For example:
OUTPUT OHP871l;"CALC:MARKl :POIN 134"
will put the marker at point number 134.
Y
Custom X-axis annotation has no effect on marker values
Note the customized X-axis annotation in Figure 7- 11.
7-67
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c