HP 8711C User Manual page 284

Modifying a
Program.
深圳市盛腾仪器仪表有限公司
You can modify the User BEGIN program with the built-in editor, an ASCII
file editor on a computer, or with keystroke recording. For example, to modify
the default program to recall a setup:
Select
[
SYSTEM OPTIONS
OUTPUT OHp8714;"DISP:MENU2:KEYl '*';*WAI"
15
2. Use an external keyboard to replace ' * ' with ' Setup 1' .
3. Move the edit cursor to line 28. Delete the line.
4. Use keystroke recording to create a setup function if you like, or you can
now insert code you have written.
To use keystroke recording to modify the program:
7. Now perform the keystrokes required for setup 1.
Key Record OFF.
10. Select softkey 1 which should be labelled "Setup 1". This should return
you to your correct setup.
11. You may save this program as an AUTOST iile or other hle for later recall.
Refer to the manual supplement, Using HP
HP 8711 C/lZC/13C/14C,
Handbook,
for more information about editing, saving and recalling program
Tel:0755-83589391
)
[
SYSTEM OPTIONS
in HP Instrument BASIC User's
provided the
Fax:0755-83539691
Automating Measurements
Operator Interaction
)
7-27
Website: www.Sengt.c