HP 8711C User Manual page 22

C A U T I O N
深圳市盛腾仪器仪表有限公司
2. Ensure the available ac power source meets the following requirements:
If the ac line voltage does not fall within these ranges, an autotransformer
that provides third wire continuity to ground should be used.
3. Ensure the operating environment meets the following requirements for
safety:
indoor use
l
altitude up to 15,000 feet (4,572 meters)
l
maximum relative humidity 5 to 95 percent relative at +40 "C
l
(non-condensing)
this product is designed for use in INSTALLATION CATEGORY II and
l
POLLUTION DEGREE 2
This product is designed for use in Installation Category II and Pollution
Degree 2.
N O T E
The above requirements are for safety only Separate conditions that must be met for specified
performance are noted in Chapter 10.
Tel:0755-83589391
Step 2. Meet Electrical and Environmental Requirements
Fax:0755-83539691
installing the Analyzer
Website: www.Sengt.c