Optimizing Measurements
Increasing Sweep Speed
When spur avoidance is on (preset default is off), the analyzer breaks each
sweep into segments. Between sweep segments, the analyzer stops and
changes internal frequencies to move mixing products. Since the analyzer
sweep is not interrupted when this feature is off, turn off spur avoidance to
increase sweep speed.
If Spur Avotd
be used In your measurement, set the start frequency as high as possible to obtain
5-8
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.c