Save/Recall Memory Allocation; Types Of Storage Disks - HP 8711C User Manual

Before reading this section, please refer to "Saving and Recalling
Measurement Results, * in Chapter 4 for an overview of the Save/Recall
functions.
This section provides details on the size of Save/Recall instrument state files.
Since disks have limited storage capacities, it is often important to know how
many instrument state Eles will Et on a disk, and how to reduce the size of
each Ele in order to maximize storage.
The analyzer is capable of saving complete instrument states for later
retrieval. It can store these instrument states to any one of the following:
The non-volatile RAM disk is powered by a battery, to provide short term
storage of data when the analyzer is not connected to ac power. With
this battery protection, data can typically be retained in memory for
approximately 250 days at 70 O C and for more than 5 years at 25 O C.
The number of Eles that can be saved to disk is limited by the space available
on the disk.
The number of bytes available for storage are displayed in the upper
right-hand portion of the disk catalog window, after the words "Bytes Free."
12-14
深圳市盛腾仪器仪表有限公司
Table 12-l. Disk Capacities
Disk
Internal non-volatile RAM disk
Internal volatile RAM disk'
Internal 3.5 * floppy disk
1 Expandable by adding SIMM DRAM ISee the Se/vies
Tel:0755-83589391
over 900 KB
over 200 KB to 16 MB
1.44 MB
Guide
for details1
Fax:0755-83539691
I
Website: www.Sengt.c