Measuring Transmission Response; Enter The Measurement Parameters - HP 8711C User Manual

This section uses an example measurement to describe how to calibrate for
and make a basic transmission response measurement. In this example, a
used.
Press (m' on the analyzer to set the analyzer to the default mode which
includes measuring transmission on measurement channel 1.
N O T E
This example measurement uses the default instrument parameters for a transmission measurement. If
your 'particular transmission measurement requires specific parameters (such as frequency range, source
power level, number of data points, and sweeptime) enter them now
3-18
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c