To Track A Frequency - HP 8711C User Manual

深圳市盛腾仪器仪表有限公司
1. If you want to move the reference position (indicated by the ) symbol on
the left side of the display), press (SCALE) Ref erez%te Position and
then use the front panel knob, the m (IJJ keys, or the numeric keypad to
enter a new reference position. A number is assigned to each possible
reference position. See Figure 4-19.
Press Cm) Ref erexe Tra&izxg Set Tra& Frequency Use the
front panel knob, the @) (IJJ keys, or the numeric keypad to enter the
frequency of interest.
level is now adjusted with each sweep so that the frequency of interest
falls on the reference line. Note that the y-axis is now a relative scale,
with all amplitude values referenced to the reference line. Also note that
a small arrow appears underneath the measurement trace at the point
where the frequency of interest intersects the reference line.
4. To turn reference tracking off, press Cm] Ref er%nce Tracking Off .
The y-axis reverts to its previous scale format, and the reference level is
readjusted so that the measurement trace is placed correctly on the display
for absolute measurements.
Tel:0755-83589391
Using Instrument Functions
Using Reference Tracking
Fax:0755-83539691
4 - 4 9
Website: www.Sengt.c