HP 8711C User Manual page 109

C A U T I O N
深圳市盛腾仪器仪表有限公司
Markers can be used to:
automatically calculate bandwidth or notch parameters of lilters
l
automatically search for multiple maximums or minimums
l
N O T E
Marker tracking can be useful for tuning OUTS when combined with the marker search functions.
When tracking is turned on, the marker search is applied to the active marker and is updated with
each sweep. To turn tracking on, press @iiE?@ Markgr
of search you will be performing. Then press
It is possible to select marker search types on measurement channel 1 that
are incompatible with those on measurement channel 2, and vice versa.
Doing so can cause the markers on the inactive channel to be moved. Be
careful to ensure you are using the correct markers for the measurement
channel you are currently measuring, especially when marker tracking is
turned on.
Tel:0755-83589391
Using Instrument Functions
Fax:0755-83539691
Using Markers
and then select the type
4-7
Website: www.Sengt.c