HP 8711C User Manual page 44

Scaling the
Measurement Trace
深圳市盛腾仪器仪表有限公司
1. Press the Cm] key to access the scale menu.
2. To view the complete measurement trace on the display, press
Enter.
4. To move the reference position (indicated by the ) symbol on the left side
of the display) to the first division down from the top of the display, press
Reference Pusition (?iJ Enter. Figure 2-3 shows how each reference
position is identified.
5. To change the reference level to 0 dB, press Reference Level @
Enter.
9
8
7
6
5
4
3
2
1
0
Tel:0755-83589391
Entering Measurement Parameters
Figure 2-3. Reference Positions
Fax:0755-83539691
Getting Started
2 - 9
Website: www.Sengt.c