User-Defined Ttl Input/Output - HP 8711C User Manual

Automating Measurements
Operator Interaction
The USER TTL port can be used as a general-purpose input or output. Like
the LIMIT TEST IN/OUT line, the USER TTL IN/OUT line is an open collector
drive. When used as an input, the state of the USER TTL IN/OUT line can be
read with either the SCPI command
or with the IBASIC command
When used as an output, the state of the USER TTL IN/OUT line can be set
with either the SCPI command
or with the IBASIC command
The USER TTL IN/OUT port can also be used in conjunction with an external
switch for softkey auto-stepping, or as a "sweep out" port. Be sure that USER
TTL IN/OUT port is configured properly for general-purpose I/O by pressing
(
SYSTEM OPTIONS
the following SCPI command:
Be sure to observe static precautions when using this port.
C A U T I O N
7-34
深圳市盛腾仪器仪表有限公司
I = READIO(I5,l)
) &jrw3it
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c