Measurement Setup And Control With Fast Recall - HP 8711C User Manual

Automating Measurements

Measurement Setup and Control with Fast Recall

5. The fast recall feature utilizes only the hrst seven hles listed that contain
6. If you have not previously saved any Eles to this disk, you many want to
7. Press P;E*~oz MBEU FastRac&Ll cuff QEF . Note that the measurement
N O T E
You may want to use the I+WW
"Other File Utilities" in Chapter 4 for information on renaming files.
8. To "fast recall" an instrument state, press the softkey next to the file that
9. The fast recall toggle will remain on (even when the analyzer is [REEY))
10. With the fast recall feature turned on, you will always be only 1 or 2 key
11. With an external keyboard connected to the rear panel DIN connector,
7-42
深圳市盛腾仪器仪表有限公司
instrument state, calibration or measurement data.
save a few instrument states now, to follow along.
display now reappears on the screen and that there are file names next
to the tlrst seven softkeys. (If any of the softkeys are blank, it's because
you had less than seven flies saved on the disk.)
The flies are placed on the softkeys in the order in which they appear in
the disk's directory table.
contains the instrument state.
until manually turned off.
presses away from recalling an instrument state.
keys Fl through F7 are equivalent to pressing softkeys 1 through 7 on
the analyzer. See "Using a Keyboard" in Chapter 4 for information on
connecting and using an external keyboard.
Tel:0755-83589391
feature to give Your files more meaningful names. See
Fax:0755-83539691 Website: www.Sengt.c